Home > How To > Solaris 10 Ntp Not Working

Solaris 10 Ntp Not Working


However, some older software declines to respond to version 3 queries. For any subsequent commands which require an association identifier as an argument, the identifier can be specified by using the form, &index. By default the sys_time privilege is not assigned to a non-global zone. Thanks!

This option causes ntpdate's version identification string to be logged. -w Wait until able to synchronize with a server. That way you won't have those kinds of start up issues and the client will be able to detect issues with servers time quality as well. Or forget something? An easy way is to use ntpdate -d server to compare the local system time with the time taken from server.

8.1.4. http://www.softpanorama.org/Net/Application_layer/NTP/troubleshooting_ntp_on_solaris.shtml

Solaris Sync Time With Ntp Server

In the official website of the NTP Pool Project you can find instruction about using the pool or picking up some server from the list they maintain. So, ntpdate -u may work, but ntpd may not. Sync from specific server(s)If you want to sync your clock to a particular server or servers, then specify it/them as below in the /etc/inet/ntp.conf file.server (ipaddress)For example :server Configuring Sendmail on Solaris 10 Index Part 1.

Start the ntpd daemon.# svcadm enable ntp How to Set Up an NTP Client Become an administrator.For more information, see How to Obtain Administrative Rights in Oracle Solaris Administration: Security Services. After reading this post, you'll be able to configure, start and verify the NTP Client service of Solaris, supplying a system clock always on time to your end users! I now get svcs | grep ntp online 12:31:24 svc:/network/ntp:default Thanks a lot! How To Check Ntp Service Status In Solaris 10 Section 107, the material on this site is distributed without profit exclusivly for research and educational purposes.

Thus, it can be used to query any compatible server on the network that permits queries. We believe this constitutes a 'fair use' of any such copyrighted material as provided for in section 107 of the US Copyright Law. Note – Do not rename the ntp.conf.cluster file as ntp.conf. https://docs.oracle.com/cd/E19787-01/820-7356/cbhijhbh/index.html These messages have an interesting format like: Sep 29 21:41:18 cathy ufs: [ID 845546 kern.notice] alloc /: file system full I found the thought fascinating to have a system- (or at

This may be necessary if a nameserver is down. -r retries Sets the number of retransmission attempts for each host. -t timeout Sets the retransmission timeout (in seconds); default = 2. Ntpq Read Connection Refused Solaris While a single server may be used, better performance and greater resistance to inaccuracy on the part of any one server can be obtained by providing at least three or four How does Solaris 10 ntp /ntpdate start up to support NTP? Using the multicast address :Specifiy that the local server is to operate in multicast mode where the client will receive NTP time information via multicast packets addressed to the multicast address

Xntpd Solaris

In 4.1 (and earlier) NOTRUST meant "Don't trust this host/subnet for time". http://thegeekdiary.com/how-to-configure-ntp-client-in-solaris-8910-and-non-global-zones/ synchronizing ntp with a server running w32time 9.4. Solaris Sync Time With Ntp Server Reply Link Roberto October 10, 2016, 3:25 pmWorked like a charm.. Solaris Ntpq I bought them as a kind of test to evaluate their quality, before entrusting Blurb mo...

This number is usually small enough to be negligible for purposes of ntpdate. passociations Prints association data concerning in-spec peers from the internally cached list of associations. The first of these is an index that numbers the associations from 1, for internal use. MoreWhitePapers Best Answer 0 Mark this reply as the best answer?(Choose carefully, this can't be changed) Yes | No Saving... How To Restart Ntp Service In Solaris 8

If this is not possible, you may need to run ntpd on the firewall itself, so that it can have full unrestricted access to UDP port 123 in both directions, and Modify that node's /etc/name_to_major file to support coexistence with VxVM. Check the official documentation for a detailed description of the ntpq utility (http://www.eecis.udel.edu/~mills/ntp/html/ntpq.html). Thus gnuplot is not covered by the Gnu copyleft, but rather by its own copyright statement, included in all source code files." (see http://www.cs.dartmouth.edu/gnuplot_info.html)


This option can be used in these cases. -p samples Set the number of samples ntpdate acquires from each server. How To Start Xntpd In Solaris I suggest you to use the newer, hence launch version 4 by typing: # svcadm enable svc:/network/ntp4:default and verify its status and log: # svcs -x svc:/network/ntp4:default svc:/network/ntp4:default (Network Time Protocol Troubleshooting

If you have set up your software, you usually want to know whether it works.

In the default configuration the limitpriv setting would be empty:global-zone# zonecfg -z zonename info limitpriv limitpriv:If you want to add the sys_time privilege to a zone then you can use the

Information about the actions taken by the NTP client are sent to the syslog utility for proper processing. Setting up the drift file The only thing left to set up it's just the drift file location, which in my case it's: driftfile /var/ntp/ntp.drift Starting the service Once your ntp.conf As for the concern over what the message ID 831711 means, it's simply a hash of the error message: http://mschuette.name/wp/2010/03/solaris-syslog-and-message-ids/ It doesn't mean anything specific, it just uniquely identifies the syslog Solaris Ntpdate See the ntpq page for more information.

writevar assocID variable_name=value [ ,. . . ] Like the readvar request, except the specified variables are written instead of read. Only enough characters of the full keyword to uniquely identify the command need be typed. Awesome Inc. Top Best Answer 0 Mark this reply as the best answer?(Choose carefully, this can't be changed) Yes | No Saving...

If the offset is much greater than +-128 ms in this case, that it can take a long time (hours) to slew the clock to the correct value. Pools maintained by the NTP Pool Project are organized in geographical hierarchy so that, for example, you can use server from a continent-level pool or, where available, from a country-level pool. Joining an NTP server pool Configuring NTP server and client on Solaris 10 an... The current exceptions are the peers mreadlist and mreadvar commands.

The latter technique is less disruptive and more accurate when the offset is small; it works quite well when ntpdate is run by cron every hour or two. The second column contains the actual association identifier returned by the server and the third the status word for the peer. This request generally gets a positive response from all servers with a clock. hostnames yes | no If “yes” is specified, host names are printed in information displays.

Here's a short example output (you could have used summary.pl --dir=/var/log/ntp --start=19990518 --end=19990604):

loops.19990518 loop 110, -30+/-36.5, rms 6.7, freq 14.95+/-1.149, var 0.612 loops.19990519 loop 113, -26+/-40.3, rms 6.9, freq mreadlistassocID assocID Like the readlist command except the query is done for each of a range of (nonzero) association IDs. In practice these hashes are probably unique (even more so in combination with the severity notice and the subsystem ufs), but I would expect to find collisions duplicate IDs for very December 24, 2008 at 5:50 AM Vishnu said...

Silver Peak View All Topics View All Members View All Companies Toolbox for IT Topics UNIX Groups Ask a New Question Solaris The Solaris group is a forum where peers share Use the snoop utility when you attempt to track NTP activities on the network. Previous: How to Change Private HostnamesNext: How to Configure IP Security Architecture (IPsec) on the Cluster Private Interconnect © 2010, Oracle Corporation and/or its affiliates Luca Merello's blog seeking technological enlightenment Straight to th...

offset the offset (in milliseconds) between our time and that of the remote. This may result in your client sending out one or more packets per second to each of your configured upstream servers, and that would be considered to be "seriously unfriendly". ISC provide pretty good description of basic issues in Chapter 9 9. The program can be run either in interactive mode or controlled using command line arguments.

Beware that iburst and pool are NFS v. 4 specific keywords: make sure you're configuring NTP implementation corresponding to the syntax you're using. This number must correspond to a key number the server has been configured to use for this purpose. now I am just trying to determine how long this delay must be, so to automate this I'm pursuing a path to periodically query the server until I get a positive This option is useful when you are behind a firewall that blocks incoming traffic to privileged ports, and you want to synchronize with hosts beyond the firewall.